Lumaz
RGBIC Addressable COB LED Strip - WS2811, Dream Color 720 LEDs/m, 12V/24V, White PCB
RGBIC Addressable COB LED Strip - WS2811, Dream Color 720 LEDs/m, 12V/24V, White PCB
Impossible de charger la disponibilité du service de retrait
🚛 Free Shipping
🎯 30-Day Money-Back Guarantee
😍 Most customers are buying more than one!
Afficher tous les détails
Product Overview
COB packaging turns this RGBIC strip into a continuous line of color, avoiding the visible gaps common to SMD strips. With 720 LEDs/m and 20 addressable pixels/m, it brings flowing color effects to shelves, displays, and accent edges; choose a 12V or 24V version.
Key Benefits
- Dream Color animation — Addressable RGBIC pixels create flowing color effects with a compatible controller, sold separately.
- Continuous COB glow — 720 LEDs/m create a dense color line with fewer visible dark spots.
- Flexible edge lighting — The 12mm PCB bends around display contours; adhesive backing attaches the strip.
- Voltage choices — Choose 12V or 24V to match your setup; power and controller are separate.
Visual Details
Specifications
| Strip type | COB RGBIC addressable LED strip |
| Length | 5m / 16.4ft |
| LED density | 720 LEDs/m |
| Addressable pixels | 20 pixels/m; one addressable group every 50mm |
| IC type | WS2811 |
| Voltage (selected variant) | 12V DC or 24V DC |
| Power | 12V version: 12W/m; 24V version: 21W/m |
| PCB width | 12mm |
| Cut interval | 50mm |
| Luminous flux | 900 lm/m |
| Color rendering index | Ra >90 |
| Beam angle | 180° |
| Waterproof rating | IP20; non-waterproof |
| Backing | Double-sided adhesive tape |
| Roll construction | Solder joints approximately every 0.5m |
| Operating temperature | −20°C to +45°C |
Package Included
- 1 × 5m COB RGBIC LED strip
- Power supply and controller are not included
FAQ
💡 What is the benefit of a COB RGBIC strip over a standard SMD strip?
This COB RGBIC strip forms a more continuous line with fewer visible dark spots, while its addressable WS2811 points support segmented color effects.
💡 What else do I need to run this LED strip?
The strip is sold without a power supply or controller. Choose a DC supply matching the selected 12V or 24V strip and a compatible WS2811 addressable RGB controller.
💡 How do I choose between the 12V and 24V versions?
Select the voltage that matches your power supply and controller; the strip is available as 12V at 12W/m or 24V at 21W/m.
💡 Can I cut the 5m COB strip to length?
Yes. Cut only at the marked 50mm intervals so each section ends at a designated cut point.
💡 Can I use this strip outdoors or in a wet area?
No. The strip is rated IP20 and is non-waterproof, so use it only in dry indoor locations.
Choose the voltage before ordering, and plan for a separate matching supply and addressable controller.
