Lumaz
Through-Wood Touch Sensor COB LED Strip Light Kit - Cuttable, Stepless Dimming, 320 LEDs/m
Through-Wood Touch Sensor COB LED Strip Light Kit - Cuttable, Stepless Dimming, 320 LEDs/m
Couldn't load pickup availability
🚛 Free Shipping
🎯 30-Day Money-Back Guarantee
😍 Most customers are buying more than one!
View full details
Product Overview
Build seamless multi-section cabinet lighting without cutting a visible switch into the furniture. A concealed sensor works through compatible non-metallic panels up to 25 mm thick and controls up to six 320 LEDs/m COB strips with tap on/off and stepless dimming.
Key Benefits
-
Through-Panel Touch Control — Works behind compatible surfaces up to 25 mm
-
One Hub, Up to Six Strips — Coordinate multiple cabinet sections
-
320 LEDs/m COB Output — Produces smooth, dot-free light
-
Tap and Hold Control — Switch instantly and dim steplessly
- 2.5 cm Cut Points — Fine-tune each run to the cabinet
Visual Details
Specifications
| Item Type | COB LED Strip Light |
| Light Color | White / Warm White / Neutral White |
| Color Temperature | Warm White (2800K-3000K) / White (6000K-6500K) / Neutral White (4000K-5000K) |
| Strip Chip Spec | SMD 2835; 320Pcs/M |
| PCB Width | 8mm |
|
Length per Strip |
1M / 2M / 3M / 5M |
|
Cut Interval |
Per 2.5cm |
| Control | Through-Wood Touch Control with Stepless Dimming |
| Maximum Panel Thickness | Up to 25 mm |
| Input Voltage | AC100V-240V |
| Power Adapter | EU Plug / US Plug |
| Rated Lifespan | Up to 50,000 hours |
Package Included
- COB LED Strips (As Selected)
- Touch Dimmer Sensor
- Centralized Power Hub
Installation Notes:
- Mount the sensor behind the surface—no switch hole required.
- Works through wood, stone, acrylic, plastic, glass and other non-metallic materials.
- Thinner surfaces provide better sensitivity. Keep away from metal to prevent interference.
FAQ
Why choose through-panel control over a visible switch?
The concealed sensor lets the cabinet surface become the control point, avoiding a visible switch cutout or exposed control module. Choose this system when a clean furniture finish matters and the sensor can be installed behind a compatible non-metallic panel up to 25 mm thick.
Which cabinet surfaces work with the touch sensor?
The sensor can operate through compatible non-metallic materials such as wood, stone, acrylic, plastic, and glass up to 25 mm thick. Install it behind the panel and keep it away from metal surfaces, which can interfere with touch detection.
How do I choose the right kit configuration?
Choose Warm White, Neutral White, or White for the required lighting tone, then select 2, 4, 5, or 6 strips to match the number of cabinet sections. Each strip can be 1 m, 2 m, 3 m, or 5 m, with a US or EU plug option for the installation location.
Can one hub light several cabinet sections?
Yes. The centralized hub supports up to six COB strip runs from one system, making it suitable for divided cabinets, shelving, and other multi-section installations. Select the kit quantity according to the number of separate runs required.
Can the strips be cut for a precise fit?
Yes. Cut each COB strip at the designated 2.5 cm intervals to match the cabinet section more closely. Because the selected length applies to every strip in the kit, choose a starting length that covers the longest planned run before trimming.
If you want cleaner lighting and easier control, this under cabinet strip is a smart fit.
