Lumaz
High-Density COB Neon Strip Light - 220–240V EU Plug, IP67, 288 LEDs/m
High-Density COB Neon Strip Light - 220–240V EU Plug, IP67, 288 LEDs/m
Couldn't load pickup availability
🚛 Free Shipping
🎯 30-Day Money-Back Guarantee
😍 Most customers are buying more than one!
View full details
Product Overview
Create continuous neon-style lines along ceilings, façades, paths, or display edges without visible LED dots. The flexible 10 × 6mm COB tube packs 288 LEDs per meter and pairs IP67 strip protection with an EU-plug switch kit for 220–240V installations.
Key Benefits
- Smooth, dot-free glow — 288 COB LEDs per meter form a continuous light line.
- Indoor-outdoor flexibility — The IP67 strip suits outdoor layouts when every connection stays protected.
- Shapeable neon profile — Flexible 10 × 6mm tubing follows curves, outlines, and edges.
- Measured custom lengths — 50cm cut points help tailor the strip to planned runs.
Visual Details
Specifications
| Input Voltage | AC 220–240V |
| Plug Type | EU plug |
| Control | Inline on/off switch; no dimming |
| LED Type | COB |
| LED Density | 288 LEDs/m |
| Profile Size | 10mm wide × 6mm high |
| Cut Interval | Every 50cm at marked points |
| Available Colors | Warm White, Natural White, White, Red, Ice Blue, Blue, Pink, Purple, Green, Golden Yellow |
| Available Lengths | 1m, 3m, 5m, 7m, 8m, 10m, 15m, 20m, 25m, 30m |
| Strip Protection | IP67; protect the plug, switch, and connections outdoors |
| Mounting | Non-adhesive; mounting clips supplied at one clip per meter |
| Power Cord Length | Approximately 90–100cm |
| Operating Temperature | -20°C to +50°C / -4°F to 122°F |
| Storage Temperature | -30°C to +60°C / -22°F to 140°F |
| Rated Life | 50,000 hours |
Package Included
- 1 × COB neon light strip in the selected color and length
- 1 × Inline on/off switch with EU power plug
- 1 × Accessories pack with mounting clips supplied at one clip per meter
FAQ
💡 Why choose a COB neon strip instead of a standard LED strip?
The 288 LEDs per meter and diffusing tube create a continuous line without visible LED dots. This makes the strip well suited to exposed outlines, curves, and architectural edges where individual light points would be distracting.
💡 Does the strip change color or support dimming?
Each variant produces the single color selected when ordering. The supplied inline switch provides on/off control only and does not support dimming or color changing.
💡 Can the COB neon strip be cut to a custom length?
The COB neon strip can be cut every 50cm at the marked cutting points. Disconnect power before cutting, and plan the finished run in 50cm increments.
💡 Can this IP67 neon strip be used outdoors?
The strip body carries IP67 protection for indoor or outdoor layouts. The EU plug, inline switch, connectors, and cut ends must remain properly protected from outdoor moisture.
💡 What power and installation conditions should I check?
This COB neon strip is designed for AC 220–240V power and includes an EU plug. It has no adhesive backing, so use the supplied mounting clips, and fully uncoil the strip before switching it on.
Choose the color and length for your layout, then confirm access to a compatible 220–240V EU outlet and a protected installation route.
